Club 80-90 Forums

lpg is still a petro chemical - Veg oil is 47p a litre - there is always the posibility of sticking a bit of that in with a diesel. LPG has quite an instalation cost so you need to factor that into your economy calculations plus it will inevitable rise in price. Plus you lose a considerable amount o...

LHD drive is really easy to get used, I'd try one before you dismiss it out of hand. Westfalias are the best conversions by a long way - top quality factory production. The German vans also tend to be better looked after, though not always. Californias and Atlantics have a lot of high tech refinemen...

T-cut or brasso will work - did all mine with T-cut look great now

Atlantics are a bit betterer and slightly loverlyer - check out Brick Yard for run down

I bought a 1.9td Passat had the engine taken out and had it put in my van. Simon at Brickwerks did the work.

try here http://www.brick-yard.co.uk/forum/forum ... asp?FID=20

just had this me self shep. Fortunately it turned out to be the switch - £6 as opposed to the cost of a new fan and 4 hours labour to remove and re-fit it. ...... Lets hope its the switch for you too

Paul, It may be if you van has been stood that the joint has just dried up and needs re-packing with grease. If you've got the tools its straight forward. When the joints are dry the bearings rattle around and clunk like mad. Try wiggling the drive shaft on that side - moving it in and out, see if t...

CV joint? _ these sound clunk when knackered

Fittted MLs - but with 215/ 60 /16 tyres. 225/75/16 is too big really and will throw your speedo / gearing out. 12mm spacers needed all round. Longer bolts and or studs also required. Can be purchased from http://www.brickwerks.co.uk I made some nice centre caps for mine too! Pic of my van with MLs ...

I wonder who around Chester can do this then ?

Someone around Huddersfield! worth the drive



.

go to www.brick-yard.co.uk - look on the forum and do a search. A couple of people have modified them - there is info on there.

that is used to stick gutter tim on with...

Anyone know?

Cheers

ikea matress pad... does what it says